Single logo

Construction Electrical Safety Inspection Checklist

A comprehensive checklist for inspecting and ensuring electrical safety on construction sites, covering various aspects of electrical installations, equipment, and worker practices to prevent accidents and maintain compliance with safety standards.

Construction Electrical Safety Inspection Checklist
by: audit-now
4.1

Get Template

About This Checklist

The Construction Electrical Safety Inspection Checklist is a crucial tool for ensuring workplace safety and compliance in the construction industry. This comprehensive checklist addresses potential electrical hazards, minimizing the risk of accidents, injuries, and property damage on construction sites. By systematically evaluating electrical installations, equipment, and practices, this checklist helps construction professionals maintain a safe working environment, comply with regulatory standards, and protect workers from electrical-related incidents. Implementing this checklist as part of regular safety audits can significantly improve overall site safety, reduce downtime, and enhance project efficiency.

Learn more

Industry

Construction

Standard

OSHA 29 CFR 1926 Subpart K - Electrical

Workspaces

Construction site
Building site
Renovation project

Occupations

Safety Manager
Electrical Supervisor
Construction Manager
Site Inspector
Certified Electrician

Electrical Safety Inspection

(0 / 5)

1
Please describe any electrical hazards observed during the inspection.

Provide a detailed description of any hazards.

To document any potential hazards that need to be addressed immediately.
2
Are all workers wearing the necessary safety gear?

Select the compliance status of safety gear.

To ensure compliance with safety regulations and protect workers from electrical hazards.
3
What is the current rating of the circuit breakers in use?

Enter the current rating in Amperes.

To ensure that circuit breakers are rated appropriately for the electrical load.
Min: 15
Target: 20
Max: 30
4
Is the grounding system properly installed and functional?

Indicate whether the grounding system is verified.

To verify that the grounding system is effective in preventing electrical shocks.
5
Is the electrical equipment in good condition and free from visible defects?

Select the condition of the equipment.

To ensure that all electrical equipment is safe to use and not a hazard.
6
Have all workers received proper electrical safety training?

Provide details on the training provided.

To confirm that all personnel are adequately trained to handle electrical equipment safely.
7
Is the emergency shutoff switch easily accessible?

Indicate whether the emergency shutoff is accessible.

To ensure that the emergency shutoff can be quickly accessed in case of an electrical emergency.
8
What is the voltage level being used on the construction site?

Enter the voltage level in Volts.

To verify that the voltage levels are within acceptable limits for safety.
Min: 110
Target: 120
Max: 130
9
When was the last electrical safety inspection conducted?

Enter the date of the last inspection.

To keep track of when inspections were last performed for compliance and safety management.
10
Is the condition of the electrical wiring satisfactory and compliant with standards?

Select the condition of the wiring.

To ensure that all wiring meets safety standards and does not pose a risk.
11
Are lockout/tagout procedures being followed during maintenance?

Indicate whether lockout/tagout procedures are being followed.

To prevent accidental energization of electrical systems during maintenance work.
12
What is the date for the next scheduled electrical safety inspection?

Enter the next scheduled inspection date.

To maintain oversight and ensure timely inspections for safety compliance.
13
Describe the process for reporting electrical incidents or near misses.

Provide a detailed description of the incident reporting process.

To ensure there is a clear and effective process for reporting and addressing electrical safety issues.
14
What is the insulation resistance measurement of the electrical systems?

Enter the insulation resistance in Megaohms.

To ensure that insulation resistance is within safe limits to prevent electrical faults.
Min: 1
Target: 100
Max: 1000
15
Are all workers using appropriate personal protective equipment?

Select the compliance status of PPE usage.

To ensure that workers are protected against electrical hazards through proper PPE.
16
When was the last electrical safety training session conducted for workers?

Enter the date of the last training session.

To ensure that all workers are up-to-date with safety practices and regulations.
17
Describe how hazardous materials near electrical installations are stored.

Provide details on the storage practices for hazardous materials.

To ensure that hazardous materials do not pose a risk to electrical systems and worker safety.
18
Are all electrical circuits properly labeled?

Select the compliance status of circuit labeling.

To ensure that all circuits are easily identifiable, which is essential for safety and maintenance.
19
What is the current rating of the extension cords in use on site?

Enter the current rating in Amperes.

To ensure that extension cords are rated for the load they are carrying to prevent overheating and fire hazards.
Min: 10
Target: 12
Max: 15
20
Are all outdoor electrical outlets weatherproofed?

Indicate whether outdoor outlets are weatherproofed.

To ensure the safety and integrity of electrical outlets exposed to the elements.
21
What is the date of the last safety compliance review for electrical systems?

Enter the date of the last compliance review.

To ensure regular reviews are performed to maintain safety standards.
22
Please provide any additional comments or observations regarding electrical safety.

Enter any comments or observations.

To capture any important details that may not be covered by the specific checklist items.
23
What is the latest test result for the Ground Fault Circuit Interrupters?

Enter the test result in milliamperes (mA).

To verify that GFCIs are functioning correctly and providing necessary protection.
Min: 4
Target: 30
Max: 6
24
Are arc flash warnings and labels present on electrical equipment?

Indicate whether arc flash labels are present.

To ensure that workers are aware of potential arc flash hazards.
25
Are overcurrent protection devices installed and functioning properly?

Select the status of overcurrent protection devices.

To prevent electrical overloads and short circuits that can lead to fires.

FAQs

The checklist should be used regularly, typically at the start of each new construction project, after major electrical installations, and as part of routine safety inspections throughout the project duration.

The inspection should be conducted by qualified individuals such as site safety managers, electrical supervisors, or certified electricians who are familiar with electrical safety standards and construction site operations.

The checklist covers various aspects of electrical safety on construction sites, including power distribution systems, temporary wiring, electrical equipment, personal protective equipment (PPE), grounding and bonding, and worker training and awareness.

By systematically identifying and addressing electrical hazards, the checklist helps prevent accidents, ensures proper maintenance of electrical systems, and promotes adherence to safety protocols, ultimately creating a safer work environment for all personnel on the construction site.

Yes, the checklist can be adapted to include project-specific requirements, local regulations, or unique site conditions while maintaining core electrical safety inspection elements.

Benefits

Ensures compliance with electrical safety regulations and standards

Reduces the risk of electrical accidents and injuries on construction sites

Identifies potential hazards and areas for improvement in electrical safety practices

Promotes a culture of safety awareness among construction workers

Helps prevent costly equipment damage and project delays due to electrical issues