Single logo
LoginSign Up

DO-254 Hardware Safety Assessment Checklist

A comprehensive checklist for conducting thorough safety assessments of airborne electronic hardware designs, ensuring compliance with RTCA DO-254 standard and enhancing overall system safety.

DO-254 Hardware Safety Assessment Checklist

by: audit-now
4.5

Get Template

About This Checklist

The DO-254 Hardware Safety Assessment Checklist is a critical tool for aerospace and defense organizations developing safety-critical airborne electronic hardware. This checklist ensures that comprehensive safety analyses are conducted throughout the hardware development lifecycle, as mandated by the RTCA DO-254 standard. By implementing rigorous safety assessment practices, companies can identify potential hazards, mitigate risks, and demonstrate the overall safety of their hardware designs. This checklist addresses crucial aspects such as functional hazard assessment, failure mode and effects analysis, and common cause analysis, helping teams to systematically evaluate and enhance the safety of airborne electronic systems.

Learn more

Industry

Aerospace and Defense

Standard

DO-254 - Airborne Electronic Hardware

Workspaces

Laboratories

Occupations

Safety Engineer
Hardware Designer
Systems Engineer
Certification Specialist
Risk Assessment Analyst

1
Has the Functional Hazard Analysis (FHA) been completed for the hardware?

Select 'Compliant' if the FHA is complete.

To ensure that all potential hazards associated with the hardware have been identified and assessed.
2
How many failure modes have been identified in the Failure Mode and Effects Analysis (FMEA)?

Enter the number of failure modes identified.

To assess the thoroughness of the FMEA process.
Min: 0
Target: 0
Max: 100
3
Have all identified risks been mitigated adequately?

Select 'Compliant' if risks have been mitigated.

To verify that appropriate measures have been taken to mitigate risks associated with hardware.
4
Is the safety certification documentation complete and available?

Provide details if the documentation is complete.

To ensure that all necessary documentation for certification is prepared and accessible.

5
Was the hazard identification process conducted per RTCA DO-254 guidelines?

Select 'Compliant' if the process was followed correctly.

To confirm adherence to established guidelines for identifying hazards in airborne systems.
6
How many critical failures have been documented during the assessment?

Enter the number of documented critical failures.

To track the number of critical failures that need addressing for safety improvement.
Min: 0
Target: 0
Max: 50
7
Describe the mitigation measures implemented for identified risks.

Provide a detailed description of the mitigation measures.

To provide insights into how risks are being managed and mitigated.
8
What is the scheduled date for the next safety review?

Enter the next scheduled review date.

To ensure that regular reviews are planned for ongoing safety assurance.

9
Has the design review for the hardware been completed?

Select 'Compliant' if the design review is complete.

To ensure that the design has been thoroughly evaluated for safety and compliance.
10
How many non-conformities have been resolved since the last audit?

Enter the number of non-conformities resolved.

To assess the effectiveness of corrective actions taken since the previous audit.
Min: 0
Target: 0
Max: 100
11
What are the key findings from the safety analysis conducted?

Summarize the key findings of the safety analysis.

To document the critical findings that impact the safety of the hardware.
12
When was the last audit conducted on the hardware?

Enter the date and time of the last audit.

To maintain a record of audit timelines for compliance tracking.

13
Have all certification requirements for the hardware been met?

Select 'Compliant' if all certification requirements are fulfilled.

To ensure that the hardware is compliant with all necessary certification standards.
14
What is the total number of safety issues identified during the assessment?

Enter the total number of safety issues identified.

To quantify safety issues that may need addressing for compliance.
Min: 0
Target: 0
Max: 150
15
Provide detailed information on the risk assessment conducted.

Detail the risk assessment findings and methodologies used.

To document comprehensive details of the risk assessment process and outcomes.
16
What is the implementation date for the safety measures recommended?

Enter the date when the safety measures were implemented.

To track when safety measures were put into effect as part of compliance.

FAQs

The main goal is to ensure that comprehensive safety analyses are conducted for airborne electronic hardware designs, in compliance with the RTCA DO-254 standard, to identify and mitigate potential safety hazards.

Safety assessments should be performed throughout the entire hardware development lifecycle, from initial concept and requirements definition through design, implementation, and verification stages.

The process should involve safety engineers, hardware designers, systems engineers, and certification specialists to ensure a comprehensive evaluation of safety aspects.

The checklist covers techniques such as Functional Hazard Assessment (FHA), Failure Mode and Effects Analysis (FMEA), Fault Tree Analysis (FTA), and Common Cause Analysis (CCA).

The safety assessment process provides documented evidence of systematic hazard identification and risk mitigation, which is crucial for demonstrating compliance with safety regulations and obtaining certification approval.

Benefits

Ensures compliance with DO-254 safety assessment requirements

Identifies and mitigates potential safety hazards in hardware designs

Enhances overall system safety and reliability

Provides structured evidence for certification processes

Improves design decisions through systematic safety analysis